Beden Yapı Catalogue Index

BEDEN YAPI

SYSTEM TYPES

• I- DOOR SYSTEMS
• II- WINDOW SYSTEMS
• III- SILICONE FAÇADE SYSTEMS
• IV- CAPPED FAÇADE SYSTEMS
• V- COMPOSITE FAÇADE SYSTEMS
• VI- SPIDER FAÇADE SYSTEMS
• VII- SKYLIGHT SYSTEMS
• VIII- SHADING SYSTEMS
• IX- SHUTTER SYSTEMS
• X- GLAZING BALCONY SYSTEMS

I- DOOR SYSTEMS

• I.I- SINGLE OPENING & DOUBLE OPENING DOORS
• I.II- FOLDING DOOR
• I.III- SLIDING DOOR
• I.IV- DEMOUNTABLE WALL PARTITIONS
• I.V. ADJUSTABLE DOOR FRAMES

• I.I- SINGLE OPENING & DOUBLE OPENING DOORS

• INSULATED AND UNINSULATED ALTERNATIVES
• SINGLE OPENING WING
• DOUBLE OPENING WING
• ALL RAL COLOR OPTIONS IN ALUMINUM COMPONENTS
• DIFFERENT INTERIOR AND EXTERIOR COLOR OPTIONS FOR INSULATED PRODUCTS
• WIDTH 800-1100 MM
• HEIGHT 2100-2800 MM
• DIFFERENT HANDLE AND HINGE OPTIONS AVAILABLE
• WING CAN OPEN IN OR OUT IN SINGLE OPENING OPTION
• WIDTH OF SYSTEM PROFILES CAN BE 55-75 MM DEPENDING ON ARCHITECTURAL AND STATIC CALCULATIONS
• ALUMINUM PROFILE WALL THICKNESS CAN BE 1.2-2.2 MM DEPENDING ON STATIC CALCULATIONS
• THE UPPER FORM OF THE DOOR CAN BE SQUARE, CUBIC OR ARCHED
• VARIOUS INSULATION BARRIER (THERMAL BREAK) OPTIONS AVAILABLE

• I.II- FOLDING DOORS

• INSULATED AND UNINSULATED ALTERNATIVES
• 2+1, 3+1, 4+1, 5+1, 6+1, 7+1 OPTIONS
• ALL RAL COLOR OPTIONS IN ALUMINUM COMPONENT
• DIFFERENT INTERIOR AND EXTERIOR COLOR OPTIONS IN INSULATED PRODUCTS
• 4 DIFFERENT SILL SOLUTIONS - WIDTH MIN. - MAX. 2400-8000 MM / HEIGHT MIN. - MAX. 2100-3000 MM
• MAX. WING WIDTH 1000 MM / MAX. WING HEIGHT 3000 MM / MAX. WING WEIGHT 150 KG
• ALUMINUM PROFILE WALL THICKNESS CAN BE BETWEEN 1.2-2.2 MM
• DIFFERENT INSULATION BARRIER OPTIONS AVAILABLE

• I.III-SLIDING DOORS

• INSULATED AND UNINSULATED ALTERNATIVES
• 6 DIFFERENT OPENING OPTIONS
• INSULATION OPTIONS OF BETWEEN 150 – 1600 PASCAL
• ALL RAL COLOR OPTIONS
• DIFFERENT INTERIOR AND EXTERIOR COLOR OPTIONS IN INSULATED PRODUCTS
• WIDTH MIN-MAX 1200-7500 MM
• HEIGHT 2100-2800 MM
• ALUMINUM WALL THICKNESS CAN BE BETWEEN 1.2-2.2 MM DEPENDING ON STATIC CALCULATION
• DIFFERENT INSULATION BARRIER OPTIONS AVAILABLE

• I.IV. MODULAR PARTITION WALLS

• UNINSULATED
• GLASS, WOOD, COMPOSITE MATERIALS etc. CAN BE USED IN PARTITIONS
• DOOR WING CAN BE OF GLASS, WOOD, ALUMINUM,
• ALL RAL COLOR OPTIONS
• CAPPED, WITH BEAD AND CAN BE IN A GLASS-LIKE APPEARANCE ONLY
• WIDTH 10-1500 MM
• HEIGHT 1000-3500 MM

• I.V- ADJUSTABLE DOOR FRAMES

• UNINSULATED
• SINGLE, DOUBLE WING
• WING CAN BE OF GLASS, WOOD OR ALUMINUM
• ALL RAL COLOR OPTIONS
• WIDTH 800-1100 MM
• HEIGHT 2100-2800 MM

II- WINDOW SYSTEMS

• II.I- SINGLE OPENING & DOUBLE OPENING & TOP/BOTTOM HUNG WINDOWS
• II.II- FOLDING WINDOWS
• II.III- SLIDING WINDOWS
• II.IV- PIVOTING WINDOWS

• II.I- SINGLE OPENING & DOUBLE OPENING & TOP/BOTTOM HUNG WINDOWS

• INSULATED AND UNINSULATED ALTERNATIVES
• SINGLE OPENING WING
• DOUBLE OPENING WING
• HUNG WING
• ALL RAL COLOR OPTIONS
• DIFFERENT INTERIOR AND EXTERIOR COLOR OPTIONS IN INSULATED PRODUCTS
• WIDTH 300-1100 MM
• HEIGHT 300-1800 MM
• DIFFERENT HANDLE AND HINGE OPTIONS AVAILABLE
• ALUMINUM PROFILE WALL THICKNESS CAN BE BETWEEN 1.2-2.2 MM AS PER STATIC CALCULATION
• WIDTH OF SYSTEM PROFILES CAN BE 55-75 MM AS PER ARCHITECTURAL AND STATIC CALCULATIONS
• THE UPPER FORM OF THE DOOR CAN BE SQUARE, CUBIC OR ARCHED
• DIFFERENT INSULATION BARRIER OPTIONS AVAILABLE

• II.II- FOLDING WINDOWS

• INSULATED AND UNINSULATED ALTERNATIVES
• 2+1, 3+1, 4+1, 5+1 OPTIONS
• ALL RAL COLOR OPTIONS
• DIFFERENT INTERIOR AND EXTERIOR COLOR OPTIONS IN INSULATED PRODUCTS
• WIDTH 2400-5000 MM
• HEIGHT 1200-1800 MM
• MAX. WING WIDTH 1000 MM
• MAX. WING HEIGHT 1800 MM
• MAX. WING WEIGHT 35 KG
• ALUMINUM PROFILE WALL THICKNESS CAN BE BETWEEN 1.2-2.2 MM
• DIFFERENT INSULATION BARRIER OPTIONS AVAILABLE

• II.III- SLIDING WINDOWS

• INSULATED AND UNINSULATED ALTERNATIVES
• 6 DIFFERENT OPENING OPTIONS
• ALL RAL COLORS OPTIONS
• INSULATION OPTIONS BETWEEN 150-1600 PASCAL
• DIFFERENT INTERIOR AND EXTERIOR COLOR OPTIONS IN INSULATED PRODUCTS
• WIDTH MIN - MAX 700-5000 MM HEIGHT 1000-1800 MM
• ALUMINUM PROFILE WALL THICKNESS CAN BE BETWEEN 1.2-2.2 MM DEPENDING ON STATIC CALCULATION
• DIFFERENT INSULATION BARRIER OPTIONS AVAILABLE

• II.IV- PIVOTING WINDOWS

• INSULATED AND UNINSULATED ALTERNATIVES
• FUNCTIONING ON HORIZONTAL AXIS
• FUNCTIONING ON VERTICAL AXIS
• ALL RAL COLOR OPTIONS
• DIFFERENT INTERIOR AND EXTERIOR COLOR OPTIONS IN INSULATED PRODUCTS
• WIDTH 600-1100 MM
• HEIGHT 1200-1500 MM
• DIFFERENT HANDLE AND HINGE OPTIONS AVAILABLE
• ALUMINUM SHAPE WALL THICKNESS CAN BE BETWEEN 1.2-2.2 MM DEPENDING ON STATIC CALCULATION
• WIDTH OF SYSTEM SHAPES CAN BE 55-75 MM DEPENDING ON ARCHITECTURAL AND STATIC CALCULATIONS
• WINDOW UPPER FORM CAN BE SQUARE, CUBIC OR ARCHED
• DIFFERENT INSULATION BARRIER OPTIONS AVAILABLE

III- SILICONE FAÇADE SYSTEMS

• III.I- CASSETTE SILICONE FAÇADE

• DIFFERENT DESIGNS OF VERTICAL AND HORIZONTAL PROFILES WITH VARIED WALL THICKNESS AND DEPTH AVAILABLE WHICH CAN MEET VARIOUS STATIC VALUES
• HEAT INSULATION PERFORMANCE CARRIED TO HIGH LEVELS IN BARRIER CASSETTE APPLICATION
• RECOMMENDED FOR MULTI-STORY BUILDINGS
• ENHANCES THE HEAT INSULATION AND ACOUSTIC PERFORMANCE OF THE FAÇADE BY A WIDE RANGE OF GLAZING OPTIONS FROM 4 MM TO 34 MM
• THE FAÇADE BEING FULLY MADE OF GLAZING MAKES IT THE MOST PREFERABLE SYSTEM FROM ARCHITECTURAL VIEWPOINT
• VERTICAL PROFILE DEPTH: 80-100-120-140-160-180-200-220 MM
• HORIZONTAL PROFILE DEPTH: 50-60-70-80-100-120 MM

• III.II- CASSETTELESS SILICONE FAÇADE

• A DUAL SILICONE LOOK IS OBTAINED BY FILLING THE HORIZONTAL AND VERTICAL JOINTS WITH SILICONE
• PROVIDES MORE SURFACE APPLICATION OPPORTUNITY WITH LESSER PROFILES THROUGH GLAZING WITH FIXING PROFILES
• SINGLE GLAZING BEAD HELPS ATTAIN 4 MM MINIMUM GLAZING OPPORTUNITY
• PROVIDES NATURAL VENTILATION VIA FAÇADE WING PROFILES THAT ARE DESIGNED IN HARMONY WITH THE SYSTEM AND IN INTEGRITY WITH THE FAÇADE APPEARANCE
• ALLOWS FOR A TOTALLY CONTINUOUS FAÇADE LOOK BY FILLING THE HORIZONTAL AND VERTICAL JOINTS WITH SILICONE
• SUITABLE FOR MULTI-STOREY BUILDINGS
• 16 MM TO 20 MM INTER-GLAZING BEAD OPTIONS AVAILABLE

IV- CAPPED FAÇADE SYSTEMS

• IV.I- FULL-CAPPED FAÇADE

• ENABLES THE PRACTICE OF ARCHITECTURAL DESIGNS IN REAL LIFE SETTINGS BY CAPS AND CONCEPT CAP DESIGNS IN DIFFERENT SIZES AND FORMS
• IT ENABLES FAÇADE APPLICATIONS THAT DO NOT DEFACE ITS APPEARANCE EVEN ON OPENABLE WINGS BY ITS 50 MM PROFILE AND ITS STRUCTURE THAT IS INTEGRATED WITH THE JOINERY SYSTEMS
• MINIMUM UF VALUE : 1.35
• IT IS A DEMOUNTABLE SYSTEM THAT PROVIDES THE CLIENT WITH ALTERNATIVE OPENING OPTIONS. CAN BE TOP OR BOTTOM HUNG.
• IT IS A FAÇADE SYSTEM WITH ENHANCED ACOUSTIC VALUE THAT IS USEABLE UP TO 34 MM THICKNESS WITH GLAZING INTEGRATED WITH THE SYSTEM AND INSULATOR OPTIONS WITH VARIOUS FEATURES
• ITS WATER DRAINAGE PERFORMANCE IS ENHANCED THROUGH THE STRUCTURE OF ITS PROFILES WITH CONDENSATION CHANNELS
• THE RIGHT DRAINAGE LINE IS FORMED THROUGH ITS SPECIAL HORIZONTAL CONNECTION ACCESSORY WHICH ENABLES THE USAGE OF VERTICAL PROFILE ON HORIZONTAL AXIS AS WELL

• IV.II- SEMI-CAPPED FAÇADE

• ENABLES NATURAL VENTILATION WITHOUT DEFACING THE INTEGRATED APPEARANCE OF THE FAÇADE WITH BOTTOM OR STANDARD TOP HUNG APPLICATION DESIGNED SPECIFICALLY FOR THE SYSTEM.
• CAPS AVAILABLE IN DIFFERENT FORMS AND DESIGNS THAT ARE USEABLE IN BOTH HORIZONTAL AND VERTICAL AXES
• A DIFFERENT FAÇADE APPEARANCE IS OBTAINED BY ONE-WAY CAP USAGE
• DUAL FAÇADE APPLICATION POSSIBLE
• THERE ARE SPECIAL ACCESSORIES DESIGNED TO DRAIN WATER THROUGH HORIZONTAL CAP IN FAÇADES ON WHICH SILICONE IS PREFERRED IN VERTICAL WHEREAS CAP IN HORIZONTAL IMPERMEABILITY IS ENSURED THROUGH THE SPECIAL INSULATION ACCESSORY USED BENEATH THE HORIZONTAL PROFILE NOTCHING
• IT OFFERS ECONOMICAL SOLUTION BY ZEROIZING THE USAGE OF SILICONE SEALANT IN JOINTS BETWEEN GLASS PANES ALLOWING SOLELY THE OPPORTUNITY FOR GASKET-JOINT APPLICATION

• IV.III- WOODEN LOAD-BEARING FAÇADE

• A CURTAIN WALL SYSTEM THAT IS DESIGNED SPECIFICALLY FOR WOODEN LOAD-BEARING SYSTEMS
• IS USER-FRIENDLY AND ENABLES EASY ASSEMBLY WITH UNREINFORCED PROFILE BY A SPECIAL DESIGN SOLVED WITHIN THE SYSTEM
• THE CWA50 SYSTEM WHICH IS PREFERRED FOR HOUSES ADDS SURPLUS VALUE TO BUILDINGS WITH REGARD TO HEAT INSULATION BESIDES ITS DECORATIVE FEATURE
• IT IS COMPATIBLE WITH CAPPED, TWO-SIDED AND SILICONE FAÇADE SYSTEMS
• IT IS A SYSTEM THAT ENABLES AESTHETICALLY DIFFERENT APPLICATIONS BY ITS CAP PROFILES WITH VARIED DESIGNS
• IT IS A FAÇADE SYSTEM THAT CAN CREATE A WARM EFFECT INDOORS
• WATER GENERATED BY CONDENSATION IS DRAINED BY THE CONDENSATION CHANNEL FORMED ON THE GASKET
• THE CARRIAGE OF THE SYSTEM THROUGH LOAD-BEARING WOODEN PROFILES WITH MINIMUM USAGE OF ALUMINUM PROVIDES BOTH THE REDUCTION OF THE COST OF ALUMINUM AND AN AESTHETIC LOOK BY WOOD

• IV.IV- HIDDEN WING APPLIED FAÇADE

• IT ENABLES THE OPPORTUNITY OF THE APPLICATION FOR INWARD-OPENING AND EXTERNALLY UNPERCEIVABLE WING
• APPLIED TO 4 MM TO 24 MM GLAZING COMBINATIONS
• ENABLES NATURAL VENTILATION THROUGH 90º-OPENING BIAXIAL WING APPLICATION
• SUITABLE FOR USE IN CAPPED, TWO-SIDED AND FOUR-SIDED FAÇADE SYSTEMS
• VERTICAL PROFILE DEPTHS: 80-100-120-140-160 MM
• HORIZONTAL PROFILE DEPTHS: 80-100-120- MM
• MINIMUM GLAZING THICKNESS: 4 MM
• MAXIMUM GLAZING THICKNESS: 24 MM

• IV.V- STEEL LOAD-BEARING FAÇADE

• IS A SYSTEM IN WHICH CLADDING ON STEEL CAN BE APPLIED IN CIRCUMSTANCES WHERE HIGH GAPS ARE OUTSTRETCHED BY MEANS OF STEEL
• ENABLES THE APPLICATION OF FAÇADE MODULES THAT ARE SAFE, HIGH IN ESTHETIC VALUE AND 3 FOLD HIGHER COMPARED TO ALUMINUM IN BUILDINGS WITH IMPRESSIVE ENTRANCES SUCH AS SHOPPING CENTERS, HOTEL LOBBIES AND RESTAURANTS
• ALL CAP PROFILE OPTIONS THAT CAN BE FOUND IN AMANOS-CAPPED FAÇADE SYSTEM CAN BE USED IN THIS SYSTEM
• PREVENTS POSSIBLE CORROSION, THAT CAN BE CAUSED BY THE CONTACT BETWEEN STEEL AND ALUMINUM, BY A SPECIAL TAPE SOLUTION
• SUITABLE FOR USE WITH STAINLESS STEEL 304, 316 AND GALVANIZED STEEL
• WATER TRANSMISSION IS PERFORMED BY CONDENSATION CHANNELS ON GASKET STRUCTURE
• THE HEAT INSULATION VALUE IS ENHANCED BY THE ISOLATORS INTEGRATED INTO THE SYSTEM
• HEAT INSULATION PERFORMANCE IS CARRIED TO HIGH LEVELS BY THE GASKET DESIGN COVERING FULLY THE PROFILE SURFACE AND THE HELP OF REINFORCEMENT INSULATOR

• IV.VI- INSULATED CAPPED FAÇADE

• PROVIDES HIGH PERFORMANCE HEAT INSULATION THROUGH SYSTEM-SPECIFIC DESIGN INSULATORS WITHOUT CREATING COST DIFFERENCE ORIGINATING FROM THE VARIATION IN INTERIOR FAÇADE COMPONENTS
• IT IS A CAPPED FAÇADE SYSTEM WITH 1,35 UF VALUE, APPLICABLE TO PROJECTS THAT REQUIRE HIGH HEAT INSULATION
• PROVIDES A FREEDOM OF DESIGN THAT BRINGS TOGETHER THE ARCHITECTURAL DRAWINGS AND THE REAL LIFE SETTINGS BY ALTERNATIVE CAPS IN DIFFERENT SIZE AND FORMS
• ENABLES AN ANGLED APPLICATION UP TO 15 DEGREES BY ITS SPECIAL ANGLED INTERIOR GASKET
• IT HAS DETAILED SOLUTIONS ENABLING CAP APPLICATION ON CORNERS BY ANGLED CAP PROFILES AND ADAPTORS FOR EDGES

V- COMPOSITE FAÇADE SYSTEMS

ALUMINUM COMPOSITE PANEL; RAL, PANTONE AND SPECIAL COLORS OUT OF THE COLOR CHART THAT YOU DEMAND ARE PREPARED FOR USE IN THE EXTERNAL FAÇADES AND INDOORS OF YOUR ARCHITECTURAL PROJECTS, IN COMMERCIALS SECTOR, CORPORATE IDENTITY ENDEAVORS, SPECIAL BUILDINGS, HOUSE AND HOSPITAL PROJECTS, AIRPORT PROJECTS AND IN MANY OTHER FIELDS WITH NON-COMBUSTIBILITY DEGREES OF A2, B1, B2

PANELS CAN BE MANUFACTURED WITHIN 2 MM – 6 MM THICKNESS RANGE AND 1000 MM – 1250 MM – 1500 MM – 2000 MM HEIGHT RANGE. APART FROM THIS, WE CAN MEET YOUR DEMANDS REGARDING WIDTHS.

VI- SPIDER FAÇADE SYSTEMS

GLASSES ARE MOUNTED ON STAINLESS STEEL OR EPOXY-COATED IRON LOAD-BEARING FRAMEWORKS THROUGH ONE-, TWO-, THREE- OR FOUR-ARM SPIDER FITTINGS AND STAINLESS ROUTELS (ALSO KNOWN AS POINT FIXING, ARTICULATED OR SWIVEL BOLTS). HANDLES ARE MANUFACTURED WITH MOVABLE CAPS TO TAKE THE STRESS LOADED ONTO THE GLASS AND TRANSFER IT TO THE STEEL FRAMEWORK. LAMINATED, GRINDING, TEMPERED GLASS IS USED ACCORDING TO THE SIZE OF THE GLASS WITH A THICKNESS DETERMINED BY STATIC CALCULATION. INTER-GLASS JOINT GAPS ARE FILLED WITH DUST PROOF SILICON ACCORDING TO ITS TECHNIQUE. TRANSPARENT FAÇADE IS A CURTAIN WALL SYSTEM THAT GIVES THE BUILDING AN ARCHITECTURAL DESIGN AND AESTHETICAL LOOK. THE MOST OUTSTANDING FEATURE OF THIS SYSTEM, AS A CURTAIN WALL SYSTEM, IS THAT VISIBILITY RATIO BETWEEN THE INTERIOR AND EXTERIOR SPACE IS RAISED TO MAXIMUM LEVELS BY THE USE OF TRANSPARENT GLAZING ALONE. THUS THERE EMERGES THE OPPORTUNITY TO CHOOSE THE CONVENIENT DESIGN AT SPECIFIC LOCATIONS OF THE STRUCTURE REGARDING THE PURPOSE OF USE.

VII- SKYLIGHT SYSTEMS

• IT IS A SILICONED SKYLIGHT SYSTEM WITH 65 MM PROFILE WIDTH, PROVIDING CAPPED AND SEMI-CAPPED APPLICATION OPTIONS.
• HIGH LEVEL OF WATER DRAINAGE IS ACHIEVED BY ENABLING THE DISPOSAL OF CONDENSATION WATER THROUGH SYSTEM-SPECIFIC CONDENSATION-CHANNELED SKYLIGHT PROFILES.
• VARIOUS INTERIOR CAP OPTIONS AVAILABLE THAT ARE ABLE TO COVER DIFFERENT SIZES OF STEEL.
• A VISUAL INTEGRATION IS GAINED THROUGH HIDING THE STEEL CONSTRUCTION BY ALUMINUM CAPS.
• IT HAS A SPECIAL SKYLIGHT PROFILE SUITABLE FOR 135 DEGREE ANGLE. MOREOVER, STRESS AND CAP OR VISIBLE SCREW-MOUNTED CAP PROFILE APPLICATION OPTIONS FOR 135 DEGREE ARE AVAILABLE.
• RAINWATER IN THE EXTERNAL ENVIRONMENT CAN EASILY BE DIVERTED THROUGH INCLINED HORIZONTAL CAP OPTION.
• MOTOR-WING APPLICATION CAN BE PERFORMED FOR VENTILATION AND SMOKE REMOVAL DURING FIRE.

VIII- SUN SHADING (BRISE SOLEIL) SYSTEMS

PROVIDE MODERN BUILDINGS WITH SHADING WHILE ENABLING PEOPLE ACCESS SUFFICIENT DAYLIGHT WITHOUT INTERRUPTING THE VISUAL CONTACT WITH THE EXTERNAL WORLD. USED FOR DECORATIVE PURPOSES AS WELL. HAVE A WIDE PRODUCT RANGE IN VARIOUS SHAPES AND DIMENSIONS AS WELL AS AN AESTHETIC EXTERIOR APPEARANCE. PROVIDE DESIGNERS WITH WORK SPACE DUE TO ITS CUSTOMIZABLE MANUFACTURING OPTION DEPENDING ON THE ORDER VOLUME. THESE SYSTEMS CAN BE USED HORIZONTALLY OR VERTICALLY AND CAN BE APPLIED IN FIXED OR MOVABLE FORMS. IN MOVABLE OPTIONS, OPTIMUM SHADING IS OBTAINED BY MANUAL OR MOTOR CONTROL. HAVE OPTIONS WITH OPAQUE, SHINY APPEARANCES, POWDER PAINT OR WOOD TEXTURE IMPRESSIONS WITH VARIOUS PATTERNS. THE DIAGONAL PIECE CAN BE MANUFACTURED AS A SINGLE PART UP TO 280 MM.

IX- SHUTTER SYSTEMS

THE MAIN PURPOSE OF USE IS SAFETY AND IT HAS A DETERRENT EFFECT AGAINST THEFT. THEY CAN OPEN AND CLOSE AUTOMATICALLY ACCORDING TO THE CLIMATE CONDITIONS BY MEANS OF SENSORS (WIND, SUN, RAIN, TIME SENSORS) MANUFACTURED BY THE COMPANY "SOMFY". SHUTTER SYSTEMS CONSIST OF TWO DIFFERENT MATERIALS BEING ALUMINUM AND STEEL. ALUMINUM LAMELLAS ARE USUALLY DOUBLE-WALLED AND IN DIFFERENT WIDTH (45-55-…85 MM). STEEL SHUTTERS ARE SINGLE-WALLED AND VARY IN THICKNESS ACCORDING TO STATIC CALCULATIONS.

X- GLASS BALCONY SYSTEMS

GLASS BALCONY SYSTEMS ARE BECOMING WIDELY USED DAY BY DAY AND DIFFERENT PRODUCTS ARE BEING DEVELOPED. THE MAIN PURPOSE FOR USE IS TO MEET THE NEED FOR A CLOSED SPACE IN WINTER AND A FULLY OPEN SPACE IN SUMMER, RATHER THAN BALCONIES PERMANENTLY CLOSED WITH PVC OR ALUMINUM PROFILES.

THERE ARE TWO TYPES (FOLDING AND SLIDING). IF SINGLE GLAZING, IT IS 8 MM TEMPERED, TRANSPARENT OR COLORED. BASIC GLASS COLOR OPTIONS: FUME, BLUE, GREEN.

X.I- FOLDING GLASS BALCONY SYSTEMS

• SINGLE GLAZING
• DOUBLE GLAZING
• ALL RAL COLOR OPTIONS IN ALUMINUM COMPONENT
• WITH ALUMINUM GASKET
• WITH CONDENSATION CHANNELS
• 1+1, 2+1, 3+1, 4+1, 5+1, 6+1, 7+1, 8+1 WING OPTIONS
• MIN. WIDTH 1000 MM
• MIN. HEIGHT 1200 MM
• MAX. WIDTH 12000 MM
• MAX. HEIGHT 2800 MM

X.II- SLIDING GLASS BALCONY SYSTEMS

• SINGLE GLAZING
• DOUBLE GLAZING
• ALL RAL COLOR OPTIONS IN ALUMINUM COMPONENT
• WITH ALUMINUM GASKET
• 2 … 10 WING OPTIONS
• MIN. WIDTH 1000 MM
• MIN. HEIGHT 1200 MM
• MAX. WIDTH 10000 MM
• MAX. HEIGHT 2500 MM

THE COMPANY

ABOUT US

Established in 1997, our company carries on its activities in the construction sector in the City of Mersin. The manufacturing, installation and marketing of Aluminum Door and Window Systems and Curtain Wall Systems as well as related contracting and sub-contracting businesses fall within our scope. All these activities are gathered under the brand BEDEN YAPI.

Focusing on the provision of high quality products and services, our company has come a long way in the development of corporate work culture within its body and our staff are inculcated with total quality approach thanks to the contribution of activities such as training services obtained from professional companies, and franchising and agency agreements with numerous corporate companies.

MISSION

To provide our clients, who plan to purchase Aluminum Door, Window and Curtain Wall products and services, with effective recipes that meet their needs through customized, boutique solutions by bringing together our experience of about 20 years in the sector.

VISION

To maintain the provision of best equipment and workmanship without sacrificing our quality policy. To keep pace with technology in order to prevent damage to nature by an ever-increasing consumption stemming from increases in populations. To become a growing company in a narrowing world by developing the best practices of new sales and marketing trends.

OUR VALUES

Beden Yapi, which started its operations in 1997, has set its business principle as customer satisfaction oriented. Blending the amateur spirit that it had on the first day of its foundation with years of experience, Beden Yapi has maintained its customs and traditions while sustaining growth at the same time.